Page 5

Risk Safety Systems - The Group.

Consolidated Risk Solutions

Consol Risk have over 30 years experience in providing Risk Consulting services to the Oil & Gas Industry Worldwide.

With an impressive track record in providing safety and risk support for companies such as:-

Alliance Engineering

BHP

Shell

BP to name a few:-

visit: www.consolrisk.com

Rig Supply Services US Inc.

Provide instrumentation solutions to the Oil & Gas Industry Worldwide.

Choke Control Panels

BOP Control Systems

Glycol Injection Units

(IS) Intrinsically Safe Systems

ESD Control and Monitoring panels

Mud Gas Separators and Mud Pumps. www.rssusservices.com

CODE RED™

Offer a unique range of preparedness Survival Kits. These kits have been designed by risk specialists from our sister company Consolidated Risk Solutions.

There are many survival kits readily available on the market, however, do they provide the correct products when facing a life threatening situation?.

The Code Red™ survival kits are designed to offer life saving equipment when in this type of situation.

When your life is in jeopardy do you really want to take a chance. www.coderedsurvivalkits.com

Slide Chute Onshore/Land Based Derrickman Escape Chute:

Supplied with a purpose built vertical support frame the chute system and frame comprises of the following:-

Box section epoxy painted frame designed to accommodate the slide chute.

Inclined heat resistant Slide Chute designed to support a dead weight of 1 – ton and heat resistant to 600 degrees and melting point of 800 degrees. Chute length varies dependent on application and distance to ground level.

The chute is totally enclosed an provides protection from radiated heat flux.

Light weight chute container with that can be attached to existing hand rails or modified to suite each application. RSS will design a container to suite your particular needs.

The vertical container has a removable back door for rapid access, a hinged door can be supplied as an option. In all cases the chute should attached securely to ensure safe operation.

The chute is fully weather resistant and can be left in a permanent deployed position if require, alternatively the chute can be stored within its container and deployed in

an emergency event .

Design:

The chute is designed to be pegged out with two 8ft box section uprights supports supplied, these are concreted into the ground and the predetermined position. The slide chute is fully extended and attache using the four Nomex Kevlar 14500Ib ropes that are sewn into each corner an run the full length of the chute from the container to the posts.

Carabineer snap on connectors are attached at the end of each Kevlar rope and make attaching the chute to the posts an easy process.

The chute is measured so that when it is in its deployed position it has sufficient sag in the centre to reduce the descent speed of the evacuees. A landing pad is attached to the end of the chute and acts a cushion when exiting.

The chute can be attached to the back of a truck if required and all designs are discussed with the customer prior to manufacturer.

Technical, Testing and Individual Component

Certification, Training and Manuals:

In all cases full testing is carried out ensuring that the escape chute system performs correctly, All components will be supplied with certification, covering: Escape Chute, frame and chute.

Full operational and maintenance manuals are supplied in electronic and paper format. Full onsite training can be provided. Risk Safety Systems can also provide Train the Trainer courses whereby key personnel are trained to become certified trainers.

Train the Trainer courses can be carried out at the customer’s facility or at a certified RSS training facility.

Each candidate is certified for a period of 2 years with certificates issued. The trainers then provide on-site training to all personnel as required.

Annual Servicing of the Slide Chute:

Annual inspection of the RSSDM-08 is required; this can

be carried out by Risk Safety Systems or a designated service agent. The RSSDM-10 escape chute system has been designed to be low maintenance providing reliability and ease of use. Annual inspections are carried out and include the escape chute and chute container.

The annual inspection includes testing and re-certification of the escape chute with all mechanical and structural components inspected and serviced as required.

The RSSDM-08 is designed to be low maintenance and only requires greasing of key components.

On the 5th year a complete inspection is carried out and the escape chute removed, unpacked, with a full inspection carried out.

RSS can also provide onsite support for installation and fitting if the customer decides to carry out the installation. If required RSS can also provide a survey prior to manufacture and installation to ensure that the proposed design is structurally suitable for proposed application.